Pulsar ULTRA Series - P043 Breakpoint

Page 8
P043 Breakpoint
The gain starting point in meters, for signal amplitude decay compensation. Used
in conjunction with P44, to establish fixed gain levels. See table below for details.
Application Type SBR
Application Type Secondary
Default = Application Dependant
Application Type
SBR
Industrial
Primary
Secondary
P43 Breakpoint (metres)
1.0m
1.5m
1.5m
1.0m
P44 Gain (slope/angle)
5
10
10
15
P050 Negative
End Setpoint.
Default = 80
Values Min = 0m Max = 99.9m