Pulsar ULTRA Series User Manual

Page 20
P887 Wipe Interval
The elapsed time between wiping cycles, on initiation of a wipe cycle the wiper
arm will perform three sweeps of the transducer face to keep it free from material
build up.
Values Min = 0.1
Max = 99999
P888 Motor Persist
Default = 20 mins
Default = 5

Pulsar ULTRA Series Specifications

General

Power Supply	12-30 V DC
Process Temperature	-40°C to +90°C (-40°F to +194°F)
Output	4-20mA, HART
Protection	IP68
Resolution	1 mm
Operating Temperature	-40°C to +70°C (-40°F to +158°F)
Dimensions	120 x 120 x 150 mm (aluminum), 120 x 120 x 150 mm (stainless steel)