Pulse-Eight neo:X+ - Connecting the Audio Outputs; Connecting to Network

CONNECTINGTHEAUDIOOUTPUTS
11.IfyouwishtousetheAudiooutputs,pleaseconnectcablestotherelevantoutput-eachoutputzone
featuresAnalogue,OpticalandDigitalCoaxoptions.
Note: The audio outputs allow matrixing, please refer to the full manual to find out more.
CONNECTINGTONETWORK
12.ConnectastandardEthernetcable(Category5e/6/7)fromthematrix's'Ethernet'porttoyourrouter
ornetworkswitch.Crossovercablesarenotsupported.
Note: Network connection is required for supporting full control/remote monitoring features of the
product.