Pulse-Eight neo:X+ - Firmware Updates; Firmware Version; New Feature

FirmwareUpdates
FIRMWAREVERSION
Version3.9.7:
NewFeature:
l GenerateProntoIRcodesfromreceivedIRsignals
l Preventauto-mutingDSPwhenaudioinputisselected
l (SnapOneSupport)–SDDPSupport
l (SnapOneSupport)–12VInfraredSupport
l (SnapOneSupport)–ServiceTagSupport
Changes:
l DoesnotmutetheampwhentheTVpowersoff,thesystemwillwaitforvolumestatusupdate
l Enableonce‘Alwaysembed’aftercalling/audio/enable_always_embed_true
Fixed:
l Thehiddenflagcouldnowbecleared
l Fixedwherelogswilldisappearafterrebooting(insomecases)
l HDBaseTlinktestnowworkonthefirst-timeload
l Audioinputsshowthecorrectinformation
l VariousARCactivation:


o
VideomatrixeswouldstoproutingtoARCwhenTVisnotresponding

o
WhentheARCsourcehasbeenset,thelogwouldshowproperstatusnow

o
Improvedalgorithmchecksfor(de)activatingARCandreportingstatus
l NomoreadditionalwarningswhendisablingARC
l ARCisdisabledwhenswitchingtoanotheraudiosource
l ARCisautodisabledwhentheTVpowersonandaudioinputareactive
l FixedproblemswithLGTVdisablingARCafterpoweringon
l Theaudiorouteisnowrestoredwhenre-selectingthesamevideosource
l LEDNetworknowworkingcorrectly