Pulse-Eight neo:X+ - Discovery Tool

ACCESSINGTHEMATRIXWITHOUTAN
INTERNETCONNECTION
Whileneoworksbestwithanactiveinternetconnectionitispossibletostillconfigureandoperatethe
systemwithoutone.However,toconfigurethesystemfromitsdefaultsalocalnetworkconnectionis
required.NormaloperationoftheCECandIRcontrolsystemsdoesnotrequireanynetworkconnection,
butIPbasedAPIcontrolorWebbasedcontrolleddoesrequireapersistentnetworkconnection.
DISCOVERYTOOL
Youcandownloadadiscoverytoolfromyourmonitoringportalathttp://monitoring.pulse-eight.com/this
programwillrunonWindows7orneweronly,whenrunitwillscanyournetworkanddetecttheIP
addressofyourmatrix.Ifyouhavemultipleneosystemsonthesamenetwork,thediscoverytoolwill
onlydisplaythelastfound.Ifyoudohavemorethanonesystem,itisadvisedthatyoudisconnectother
systemsfirst.
ThediscoverytoolwilldisplaytheIPaddressofthematrix,youcanthenaccessthematrixbytypingthat
IPaddressintoyourwebbrowsersaddressbar.
Note: It is recommended in this mode that you configure the networking to use a static IP address, this
allows for you to bookmark the page easily and return to the web interface easily without needing to run
the discovery tool again.