Pulse-Eight neo:X+ - Page 54

CRESTONHOME
Note: This is an example for the neo:8a driver. Use the appropriate driver to control the intended
hardware.
BeforetheMatrixcanbeconfiguredasadevicewithinCrestronHome,itmustbe"sideloaded"into
CrestronHome.Toside-loadtheDriveryouwillneedtocopythedriverpackagefiletoyourCrestron
Homeprocessor,weadviseyouuseCrestronToolboxforthisprocess.
PleaseplacethePulse-EightCrestonHomeDriverintothefollowingfolder:
InternalFlash\user\ThirdPartyDrivers\Import
Oncethedriverhasbeenside-loadeditwillappearintheImportfileasshownbelow: