Set the parameters of Main-Stream and Sub-Stream as below:
Resolution: 1280 x 720, 640 x 368, 320 x 208 optional.
Frame Rate: Set the frame rate according to the bandwidth. Frame rate could be “Auto” or “from 1 fps to 30
fps (Real time)”. If the network situation is not ideal, you can reduce the frame rate to control the coding rate,
make the moving pictures smoother.
Bit Rate: Higher bite rate means better quality images, but takes more bandwidth, so adjust the settings
according to the actual bandwidth available. The range of bit rate from 128 Kbps ~ 4 Mbps.
Image Quality: Better image quality, higher bit rate value, but it will take more bandwidth, the image quality
parameters could be set as below:
NOTE: When the device runs, only can select Bit Rate or Image Quality either.
Motion Detection
Motion Detection Zone Armed:
Can set all zones to be armed, or a specified zone armed.
To Next Page
Loading...
Need help?
General
