● Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode
to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).
Alarm output: Select it to enable alarm output, unselect to stop.
SD-Card Record: Select it to enable record to SD card, unselect to stop.
Send E-mail: Select it to enable E-mail alert function, unselect to stop.
FTP Upload: Select it to enable FTP upload function, unselect to stop. .
Click Save to save all the settings.
Click Update to refresh the settings.
Record
Local Settings
Note: This feature will suitable for IE only, as other browsers not support IE activeX.
Enable Alarm Record: Camera will record to the path user set when Alarm happens.
Alarm Record time: User can set the record time when Alarm happens. Such as 2 mins.
Manual Record Pack time: User can set the manual record time, such as 2 hours. Once click the “Record”
button under the live video screen, camera will record as long as user set.
Path: This belongs to the PC path, user can set the PC path to store all records.
To Next Page
Loading...
