16
• Press button 1 until the “dur” and “0.00” ashes on the digits, beside automatic
cooking icon ashes.
• Set the cooking time using buttons 3 and 2, within the range from 1 minute to 10
hours.
The set time is memorized after about 7 seconds; the current time is shown again.
Automatic cooking icon remains on the display.
Select the required temperature and the oven function.
When cooking is completed, an audible signal will be heard for approximately 7 minutes,
and the automatic cooking icon starts to ash again. Return control and thermostat knobs
to the OFF position. Press button 1, 2 or 3 to cancel signal and to return to the manual
operation.
DELAYED COOKING
If the oven is supposed to turn on for specied cooking time and turn off at specied time,
cooking time and the cooking end time can be set. It is named as full-automatic operation.
• Press button 1 until the “dur” and “0.00” ashes on the digits, beside automatic
cooking icon ashes. (for example hour is 17:30 now)
• Set the cooking time using buttons 3 and 2, within the range from 1 minute to 10
hours. (for example 1 hour)
• Press button 1 until the “End” and “18.30” (end time) ashes on the digits.
• Set the turn-off (cooking end) time using buttons 3 and 2, which is limited up to 23
hours 59 minutes. (for example 19:30)
• Turn the thermostat and function control knobs to the required settings.Cooking icon
is disappeared on the display. Oven will not be switched on until cooking start time
(for example 18:30), that is the difference between the cooking end time and the
cooking time. When cooking is completed (19:30), an audible signal will be heard for
approximately 7 minutes, and the automatic cooking icon starts to ash again. Return
control and thermostat knobs to the OFF position.
• Press button 1, 2 or 3 to cancel signal and to return to the manual operation.
KEY / OVEN LOCK
Press button 3 for 3 seconds to activate or deactivate key or oven lock. If activated when
automatic operation goes on, only keys locked. If activated when no automatic operation,
oven resistances locked too besides keys.
COOLING FAN OPERATION
Air condition system provide with cooling fan that prevent overheating of the outer surface
of the oven and prevent damage to surrounding.This fan create an air stream that provide to
extract the warm air from the front grills (ventilation). At the same time it creates an air curtain
between control panel and cover and it prevent the overheating of these two parts and upper
components. Air circulation by cooling fan cause of the prevent consendation due to heat and
moisture for electrical and mechanical components and it provide their safe and ensures of
a long life. (See Figure 11)
The principle of the cooling fan varies by product model. Your product has the following operating principles.
•
The cooling fan starts running automatically when the ovens start working. Working
terminates automatically disabled.And it disables automatically when working terminates.
To Next Page
Loading...