QUESTION 84: Trigger polarity on power up
Location 1 = Trigger polarity Location 2 = Reserved
Location 3: = Reserved Location 4 = Reserved.
Location 1: Select as positive on power-up to give a negative switch on trigger
QUESTION 85 to 87: Reserved
QUESTION 88 to 93: Primary telephone number 1 (24 digits available)
QUESTION 94 to 99: Secondary telephone number 1 (24 digits available)
QUESTION 100 to 108: Reserved
QUESTION 109: Auto arm type
QUESTION 110: Auto arm time (End user programmable)
Location 1 = Hours x 10 Location 2 = Hours x 1
Location 3 = Minutes x 10 Location 4 = Minutes x 1
QUESTION 125 to 149: Hardwired triggers
Location 1 = Digit 1 of trigger Location 2 = Digit 2 of trigger
Location 3 = Trigger number Location 4 = Trigger action
QUESTION 150 to 164: Wireless triggers
Location 1 = Digit 1 of trigger Location 2 = Digit 2 of trigger
Location 3 = Trigger number Location 4 = Trigger action
Special note: When using wireless triggers, the trigger will only transmit for 2 seconds.
Location 4 will determine if the trigger switches again at the end of the selected trigger timer.
Location 4 as a 0 means no second transmission.
Location 4 as 1 to A means that the selected trigger will switch at the end of the trigger timeout.
To Next Page
Loading...
Need help?
General