To Next PageTo Next Page
Need help?Do you have a question about the QD Dynamics Pi HSC816 and is the answer not in the manual?
General| Brand | QD Dynamics |
|---|---|
| Model | Pi HSC816 |
| Category | Gateway |
| Language | English |
Details on wiring normally open detectors with end-of-line resistors.
Details on wiring for dual end-of-line tamper detection.
Diagram showing the 4-wire bus line connection for keypads.
Procedure for resetting the control panel to factory defaults.
Procedure to learn Codex remotes into the HSC816 system.
Procedure to assign functions to Codex remote buttons.
Procedure for performing a walk test of all zones.
Configuration for siren timer, delay, fault, and AC fail timers.
Configuration for arming modes like fast arm, bypass, and auto re-arm.
Configuration parameters for hardwired triggers.
Configuration parameters for wireless triggers.
Configuration of reporting codes for various events.
Data locations for Codex remote transmitter programming.
Features the user can program from the keypad.
Procedure for adding or changing user PIN codes.
Procedure for setting the panel's time and date.
Procedure for programming auto arm time and mode.
