QNAP SAS JBOD CLI 1.0 - Enable or Disable EDFB; Locate Disk

Enable or Disable EDFB
Description
Enable or disable EDFB.
Command
edfb
Syntax
edfb {on | off}
Parameters
Parameter/Value Description
on
Enable EDFB.
off
Disable EDFB.
Examples
The following example enables and then disables EDFB.
Locate Disk
Description
Locate a disk by its position.
Command
locate
Syntax
locate {<disk number>}
Parameter
<disk number>
Enter a disk number.
Command-Line Interface User Guide
Conventions and CLI Commands 14