QNAP SAS JBOD CLI 1.0 - Enable or Disable Buzzer; Zone

Example
The following example locates disk one.
Enable or Disable Buzzer
Description
Enable or disable the buzzer.
Command
buzzer
Syntax
buzzer {on | off}
Parameters
Parameter/Value Description
on
Enable the buzzer.
off
Disable the buzzer.
Examples
The following example enables and disables the buzzer.
Zone
Description
Configure the zone information.
Command
phyzone
Syntax
phyzone {on | off | default | get | clr <group number> | clr all | <group
number> <start slot> <end slot> <SAS port>}
Command-Line Interface User Guide
Conventions and CLI Commands 15