QNAP SAS JBOD CLI 1.0 User Manual

2. Product Overview
This chapter provides basic information about the QNAP JBOD Expansion Unit JBOD enclosure.
About QNAP JBOD Enclosures
QNAP JBOD enclosures are designed to increase the capacity and utility of your NAS or computer, providing
a wide range of storage applications. You can manage installed drives independently or configure them as
software RAID groups using the host device. The TL-R1220Sep-RP and TL-R1620Sep-RP feature twelve
and sixteen 3.5-inch SATA/SAS 12 Gbps drive bays with four SFF-8644 ports.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Component TL-R1220Sep-RP TL-R1620Sep-RP
Storage
Drive bays • 12 x 3.5-inch SAS 12 Gbps
• 12 x 3.5-inch SAS 6 Gbps
• 12 x 3.5-inch SATA 6 Gbps
• 16 x 3.5-inch SAS 12 Gbps
• 16 x 3.5-inch SAS 6 Gbps
• 16 x 3.5-inch SATA 6 Gbps
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 3.5-inch SAS hard disk drives
2.5-inch bays:
• 2.5-inch SATA hard disk drives
• 2.5-inch SAS hard disk drives
• 2.5-inch SATA solid-state drives
Hot-swapping Supported
External I/O Ports & Expansion Slots
SFF ports 4 x SFF-8644
Interface
Buttons Power
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide
Product Overview 4

QNAP SAS JBOD CLI 1.0 Specifications

General

Brand	QNAP
Model	SAS JBOD CLI 1.0
Category	Enclosure
Language	English