Installation Requirements
Category Item
Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Hardware and peripherals • NAS or computer
• Storage drives
Tip
For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
• USB connector cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Setting Up the JBOD Enclosure
1. Place the JBOD enclosure in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see the following topics:
• Installing 3.5-inch Drives on 3.5-inch Trays
• Installing 2.5-inch Drives on 3.5-inch Trays
3. Connect the power cord.
4. Connect the JBOD enclosure to your NAS or computer.
For details, see the following topics:
• Connecting the JBOD Enclosure to a NAS
• Connecting the JBOD Enclosure to a Computer
5. Power on the JBOD enclosure.
TL-D800C User Guide
Product Overview 7
To Next Page
Loading...
