QNAP TS-101 Turbo Station User Manual

Chapter 2 Install TS-101
2.1 Install Hard Disk
1. Unfasten the two round head screws at the back of TS-101. Pull out the front
case of TS-101 as shown below:
Pull Pull
2. Install a hard disk in TS-101 drive plate. Make sure the disk holes of the disk
match the holes of drive plate. Lock the disk with flat head screws.
- 10 -

QNAP TS-101 Turbo Station Specifications

General

Brand	QNAP
Model	TS-101 Turbo Station
Category	Server
Language	English