Safety Warnings
1. TS-101 can operate normally in the temperature of 0ºC-35ºC and relative
humidity of 0%-85%. Please make sure the environment is well-ventilated.
2. The power cord and devices connected to TS-101 must provide correct
supply voltage (36W, 90-264V).
3. Do not place TS-101 in direct sunlight or near chemicals. Make sure the
temperature and humidity of the environment are in optimized level.
4. Unplug the power cord and all connected cables before cleaning. Wipe TS-
101 with wet towel. Do not use chemical or aerosol to clean TS-101.
5. Do not place any objects on TS-101 for the server’s normal operation and to
avoid overheat.
6. Use the flat head screws in the product package to fasten the hard disk in
TS-101 when installing hard disk for proper operation.
7. Do not place TS-101 near any liquid.
8. Do not place TS-101 on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in your location when using TS-101. If you
are not sure, please contact the distributor or the local power supply
company.
10. Do not place any object on the power cord.
11. Do not attempt to repair your TS-101 in any occasions. Improper
disassembly of the product may expose you to electric shock or other risks.
For any enquiries, please contact the distributor.
- 6 -
To Next Page
Loading...
Need help?
General
