QNAP TS-h 90FU Series User Manual

7. Attach the case cover.
a. Place the cover on the device.
b. Push the device into the chassis.
c. Tighten the screws.
8. Connect all cables and external attachments.
9. Power on the device.
10. Verify that the module is recognized by the device.
a. Log on to QuTS hero as administrator.
b. Go to Control Panel > System > System Status > Hardware Information .
TS-hx90FU User Guide
Installation and Conguration 25

QNAP TS-h 90FU Series Specifications

General

Brand	QNAP
Model	TS-h 90FU Series
Category	Storage
Language	English