TS-h1090FU
2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
Installing Handles
Installing handles enables you to better grip and secure the device on a rack.
1. Power o the NAS.
2. Install a handle on an angle bracket.
a. Align the openings on the handle with the two round screw holes on the angle bracket.
b. Attach the screws to lock the handle to the angle bracket.
TS-hx90FU User Guide
Installation and Conguration 46
To Next Page
Loading...
