QNAP TS-h 90FU Series User Manual

LED Status Description
System status Flashes green and red
alternately every 0.5
seconds
• A drive is being formatted.
• The device is being initialized.
• The operating system is being updated.
• RAID rebuilding is in progress.
• Online RAID Capacity Expansion is in progress.
• Online RAID Level Migration is in progress.
• The rmware is being updated.
Important
When updating the rmware, do not remove
the power cord or USB cable, and do not
force-exit the application.
Red • A drive is invalid.
• A shared folder has reached its full capacity.
• A shared folder is about to reach its full capacity.
• A system fan is not functioning.
• An error occurred when accessing (read/write) the
data.
• A bad sector is detected on the hard drive.
• The device is in degraded read-only mode (two
member drives failed in RAID 5 or RAID 6 but the data
can still be read).
• A hardware self-test error occurred.
Flashes red every 0.5
seconds
The device is in degraded mode (one member drive failed
in RAID 1, RAID 5, or RAID 6).
Green The device is ready.
Flashes green every 0.5
seconds
• The device is not congured.
• A drive is not formatted.
O • All drives are in standby mode.
• The device is powered o.
Drive activity Flashes red Data is being accessed, and during the process a drive
read/write error occurred.
Red A drive read/write error occurred.
Flashes green Data is being accessed.
Green The drive is ready.
O No drive was detected.
TS-hx90FU User Guide
Basic Operations 55

QNAP TS-h 90FU Series Specifications

General

Brand	QNAP
Model	TS-h 90FU Series
Category	Storage
Language	English