QNAP TS-h 90FU Series User Manual

Component TS-h2490FU-7232P-64G
TS-h2490FU-7302P-128G
TS-h2490FU-7302P-256G
TS-h1090FU-7232P-64G
TS-h1090FU-7302P-128G
TS-h1090FU-7302P-256G
Drive compatibility 2.5-inch U.2/U.3 NVMe PCIe Gen4/
Gen3 x4 solid-state drives
Note
Gen4 solid-state drives
will run at Gen3 speeds.
• 2.5-inch U.2/U.3 NVMe PCIe
Gen4/Gen3 x4 solid-state
drives
• 2.5-inch SATA solid-state drives
Tip
• For the list of compatible drive models, go to
https://www.qnap.com/compatibility.
Hot-swapping This device supports hot-swapping for all drives.
Network
25 Gigabit Ethernet ports • TS-h2490FU-7232P-64G: 2 x 25
GbE SmartNIC SFP28
• TS-h2490FU-7302P-128G: 4 x
25 GbE SmartNIC SFP28
• TS-h2490FU-7302P-256G: 4 x
25 GbE SmartNIC SFP28
• TS-h1090FU-7232P-64G: 2 x 25
GbE SmartNIC SFP28
• TS-h1090FU-7302P-128G: 2 x
25 GbE SmartNIC SFP28
• TS-h1090FU-7302P-256G: 2 x
25 GbE SmartNIC SFP28
Note
The 25 Gigabit Ethernet port is also compatible with 10
GbE SFP+.
2.5 Gigabit network interface 2 x 2.5 GbE RJ45
Note
The 2.5 Gigabit Ethernet ports support the following
network connectivity speeds: 2.5 GbE, 1 GbE, 100 Mb,
and 10 Mb.
External I/O Ports & Expansion Slots
PCIe slots • 2 x PCIe 4.0 x4
• 2 x PCIe 4.0 x8
• 1 x PCIe 4.0 x16
2 x PCIe 4.0 x16
Tip
For the list of compatible drive models and expansion
cards, go to https://www.qnap.com/compatibility.
USB ports 2 x USB 3.2 Gen 1 Type-A 3 x USB 3.2 Gen 1 Type-A
Interface
Buttons • Power
• Reset
Dimensions
Form factor 2U Rackmount 1U Rackmount
Dimensions (H x W x D) 88.3 x 481 x 510.2 mm
(3.48 x 18.93 x 20.09 in)
44 x 430 x 580
(1.73 x 16.93 x 22.83 in)
TS-hx90FU User Guide
Product Overview 5

QNAP TS-h 90FU Series Specifications

General

Brand	QNAP
Model	TS-h 90FU Series
Category	Storage
Language	English