QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 51 197
Partitions
Edit the default name of a partition and view a list of users and sensors that
are currently assigned to a given partition. Partitions 1, 2, 3 & 4 only appear
when Partitions are enabled and when at least one sensor is learned into
them.
Info:
View Users and Sensors
associated with each
partition
Edit:
Rename a partition that
suits its location or area
being protected
Overview:
View the number of
partitions set up on a
system. There must be at
least one sensor assigned
to a partition before it can
be viewed/edited
*
The “Partitions” icon will only
appear if Partitions are enabled
under Installer/Dealer Settings
Note: This feature has not been evaluated for EN Grade 2
To Next Page
Loading...
Need help?
General
