QOLSYS IQ4 Hub User Manual

Z-WAVE DEVICES
Clears Z-Wave device from a network, whether it was enrolled with another controller previously
or the IQ4 Hub. Also deletes a device from the IQ4 Hub if currently paired.
Touch
“Clear Device”
Panel will start sending a
“Clear” signal
Press
“Pair” or “Learn”
button on device*
NOTE: Each Z-Wave device is different, and not all devices have a hard button to pair or
learn. Refer to your device’s installation manual for specifics on pairing or learning.
Panel returns to
Z-Wave Device
menu when
complete
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 98 197
CLEAR DEVICE

QOLSYS IQ4 Hub Specifications

General

Brand	QOLSYS
Model	IQ4 Hub
Category	Control Panel
Language	English