The battery should NEVER be disconnected without following proper power-down procedures
Failure to comply may result in data corruption, panel failure, and a void of the manufacturer's warranty
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 7 197
Legacy Security
RF Radio*
(319.5 MHz, 345 MHz or 433 MHz)
(For CE use SRF433 only. Not
approved for EN Grade 2 applications)
PowerG Radio*
(Required for EN Grade 2 installations)
*NOTE: IQ4 Hub will typically only have 1
RF daughter card pre-installed from the
factory. Depending on model/country
variant it will be either PowerG, 319.5
MHz, 345 MHz OR 433 MHz
To Next Page
Loading...
Need help?
General
