QSC TouchMix Series - Input Channel - Aux Sends; Auxiliary Channels Flow Diagram

36
TD-000472-00-B
Input Channel – Aux Sends
Auxiliary outputs are used to create a mix for stage monitors, in ear monitors, remote speakers or video / broadcast. For the TouchMix-16, there are six
(1-6) mono and two (7/8 – 9/10) stereo Aux mixes. For the TouchMix-8 there are four (1–4) mono Aux mixes.
Refer to — Figure 26
1. Auxes Tab – Selects the Aux Sends screen
2. Overview Button – Navigates to the Aux Overview where you can see and adjust all
Aux Sends at one time
3. Aux Master Buttons – Touch one of the Aux Master buttons to go to the associated
Aux output controls.
4. Aux Send Sliders – The Aux Send sets the level of audio sent from the channel to the
Aux output; -40 dB (-Inf) is off.
5. Pre Fdr/ Post Fdr / Pre Dyn / Pre All Button – Takes you to the Aux Output channel
where you can change the setting. This setting is for all Aux Sends to the selected Aux
Output. Determines where in the signal flow the aux signal is taken. Refer to — Figure 27
6. Aux Sends Pan Slider – Aux mixes (7/8 & 9/10 for TouchMix-16, only) always have
a pan control. When two auxes are linked, the even aux’s send control becomes a pan
control. Refer to the Aux Output topic for Aux Linking information.
7. Aux Link Indicator – Indicates the Aux channels are linked. The TouchMix-16, auxes
7/8 and 9/10 cannot be unlinked. You can link Aux channels from an Input channel Aux Sends screen by touching one of the Aux Master buttons,
or one of the pick-off buttons. Both take you to the Aux channel Setup screen where linking is accomplished.
Auxiliary Channels Flow Diagram
The Pre All, Pre Dyn, Pre Fader, and Post Fader buttons are radio-buttons that provide options for where the Aux Outputs get their signal. In — Figure
27 the Pre Fader button is selected.
— Figure 27 —
Input
Channels
L C R
EQ Dynamics
Channel
Fader
Channel
Pan
Aux
Sends
Audio
Input
Aux Outputs
Pre Fader
Pre All
Pre Dyn
Post Fader
-40 -20 -10 -5 5 10U
Home Select an
Input Bank
Touch Select
Button
Select
Auxes Tab
AuxesIn 2
Inputs 1-8
— Figure 26 —
Pre Dyn
Pre All
Pre Fdr
Pre All
Pre Fdr
Pre Fdr
Pre Fdr
Pre Fdr
2
3
1
7
4
5
6