QSC TouchMix Series - Input Channel - Presets

37
TD-000472-00-B
Input Channel – Presets
Select, recall and store channel settings.
Refer to — Figure 28 and — Figure 29
1. Presets Tab – Selects Presets screen.
2. Current Preset – The current preset.
3. Preset Info Button (Factory only) – After selecting the Instrument, Type, and Preset,
press this button to see more information about the preset. Information provided
varies and may include style of music, instrument details, microphone/pick-up type and
position, or other helpful information. This button provides information only, it does not
change anything.
4. Factory / User Switch – Toggles between Factory and User presets.
• Factory Presets – A library of QSC designed input-channel presets.
• User Presets – User Presets may be stored to and recalled from Internal memory or an
External (USB) storage device.
5. Instrument List (Factory only) – Displays a list of instrument categories. For example,
Drums, Strings etc. Select the instrument assigned to this channel.
6. Type List (Factory only) – Displays a list of instruments within the Instrument category
you selected. Select one.
7. Preset Name List (Factory only) – Displays a list of factory-designed presets, select one.
8. Recall Preset Button – Recalls the selected Preset. Recalls all parameters for an Input
Channel except:
• Analog/Multi-track state
• Track/Arm button
• Cue
• Mute
• Channel Link state
9. Omit Levels Switch – When engaged, Channel Faders, FX Sends, and Aux Sends are not
recalled.
10. Omit Name Switch – When engaged, preset Channel Names are not recalled.
11. Omit Phantom Switch – When engaged, Phantom power “On” setting is not recalled.
12. Save / Save As Button (User only) – Displays a page with options for naming a preset
and selecting internal or USB storage destination.
13. Internal List (User only) – Displays a list of user-defined presets that are saved on the
mixer.
14. External (USB) List (User only) – Displays a list of user-defined presets that are saved
on a USB drive currently connected to the mixer.
15. Copy to USB Button (User only) – Copy the selected Internal preset to a USB drive
connected to the mixer. Cannot copy to Factory or to the same location as the selected
file.
16. Copy to Internal Button (User only) – Copy the selected USB preset to the Internal Mixer storage. Cannot copy to Factory or to the same
location as the selected file.
17. Delete Button (User only) – Select a User Preset and touch this button to delete the Preset.
Home Select an
Input Bank
Touch Select
Button
Select
Presets Tab
PresetsIn 2
Inputs 1-8
— Figure 28 —
2
3
1
7
4
5
6
9 10 11
8
— Figure 29 —
13
12
15
16
17
14
8
11
10
9