71
TD-000472-00-B
Specifications
TouchMix-8 TouchMix-16
DIsplay (both models) 6.1” x 3.5” (156mm x 90mm) color TFT, touch sensing.
Inputs (Mic/Line) 12 Total:
4, XLR/TRS combo
4, XLR
2 Stereo, 1/4” TRS
20 Total:
4, XLR/TRS combo
12, XLR
2 Stereo, 1/4” TRS
Input (Talkback) N/A 1, XLR
Outputs 2 Main, XLR, line-level
4 Auxes, XLR, line-level
1 Stereo TRS, (Line or In-Ear Monitor, 16 ohm min. impedance)
1 Stereo Cue, TRS, (Line or headphone, 16 ohm min. impedance)
2 Main XLR, line-level
6 Auxes: XLR, line-level
2 Stereo auxes: TRS, (Line or In-Ear Monitor, 16 ohm min. impedance)
1 Stereo Monitor, TRS, (Line or headphone, 16 ohm min. impedance)
1 Stereo Cue, TRS, (Line or headphone, 16 ohm min. impedance)
Mic & Line Input Channel Processing 4-band parametric EQ with Hi/Low shelving option • variable 24db/octave Low-cut & High-cut filters • Gate • Compressor
2-Track (USB) & FX Return Processing 2-band shelving EQ • variable 24db/octave Low-cut • Gate • Compressor
Output Channel Processing Main outputs and auxes 1–6: 1/3 octave graphic EQ • Limiter • 4 full-frequency notch filters • Variable 18dB/oct Low-cut and High-cut filters
Auxes 7/8 & 9/10 (TM-16 only): 4-band parametric EQ, Limiter • Additional variable 18dB/oct Low-cut and High-cut filters
Recording
1
14 tracks, requires USB 3.0 HD • FAT32 format • minimum 7200 RPM 22 tracks, requires USB 3.0 HD • FAT32 format • minimum 7200 RPM
Groups 8 DCA groups (with mutes) • 8 Mute groups
Cue Selectable AFL or PFL
Effects 4 professional effects engines configurable as reverb (2 types) • pitch shift • mono delay • stereo delay • chorus.
1 Pitch Correct (assignable to any mono input channel)
Scene and Preset Memory Scenes: 130 user-defined scenes, including all mixer parameters may be stored internally or on FAT32 formatted USB
Channel and FX Presets: 130 user-defined channel presets and 130 FX presets may be stored internally or on FAT32 formatted USB
External Control
2
iOS TouchMix App for iPad, iPad mini, iPad Air, iPhone, and iPad Touch. Control via Wi-Fi provides access to all mixer functions. When run on
iPhone and iPod touch, controls personal monitor mix, record/playback transport and user buttons.
Requires iOS 7 or higher.
Wi-Fi
3
USB Wi-Fi adapter included
Dimensions (HWD) 56 mm x 333 mm x 245 mm
2.2” x 13.1” x 9.6”
58 mm x 360 mm x 291 mm
2.3” x 14.2” x 11.5”
Weight 4.3 lb (1.95 kg) 5.9 lb (2.98 kg)
Line Voltage Requirements 100 - 240 VAC, 50 - 60 Hz
Sampling Frequency Selectable 44.1kHz or 48kHz
Internal Processing 32-bit floating point
Latency <1.6msec, any input to any output
THD <0.005%, +4 dBu, 20 Hz - 20 kHz, unity gain, any input to any output
Frequency Response 20 Hz - 20 kHz +/-0.5 dB, any input to any output
Dynamic Range 105 dB
Equivalent Input Noise -126 dBu
Residual Output Noise -86 dBu
Crosstalk -80 dB
S/N Ratio -94 dB
Maximum Input Level +16 dBu (Mic/Line inputs, XLR), +26 dBu (Mic/Line inputs, TRS), +22 dBu (Stereo inputs)
Phantom Power 48V, individually switchable per channel
K & Lock
®
Security Slot
4
Compatible with the MicroSaver Security Cable
Included Accessories USB WiFI adapter, Soft Carrying Case, Power Supply
1 A list of drives that have been validated by QSC may be found at qsc.com. The hard-drive market is huge and continuously changing so there are many drives QSC has not validated
that will work. Always test a new drive before using it for a critical session. Minimum requirement is USB 3.0 HD, SSD or 7200 RPM, FAT32 format.
2 The TouchMix App requires iOS 7 or higher.
3 Use only the Wi-Fi adapter supplied with your mixer.
4 Available on early production models of TouchMix-16.
To Next Page
Loading...
