65
TD-000472-00-B
Recording Setup
Recall, initiate, and manage recording sessions.
Press
Record / Play
Record/
Play
Session Naming here
New / Recall Session:
Touch
New / Recall
Refer to — Figure 68
1.
New Session Button
– Displays a keyboard used to enter a name and initiate a
new session.
2.
Current Session Label
– Displays the name of the currently active recording/
playback session.
NOTE:
All session names must be in upper-case letters.
The session you want to rename must be the current session.
3.
Rename Button
– Touch the Rename button to change the name of the
current session.
4.
USB Sessions List
– Displays a list of recording sessions available on the USB
device connected to the mixer. Select a session to Recall or Rename
5.
Record Pick-off Point Switch
• Pre – Recorded signal is taken before the channel EQ, compressor and gate.
• Post – Recorded signal is taken after channel EQ, compressor and gate.
•
Recall Session Button
– Loads the session selected in the USB Sessions window.
NOTE:
To return to the main Record / Play screen, press the Home button.
— Figure 68 —
3
2
5
1
4
6
To Next Page
Loading...
