Qualstar Q24 User Manual

Q24/Q48 Tape Library Installation and Operations Manual
4.7.5 Main error codes
Error
Code
Description
User Action
Critical Component Status
80
Barcode Reader Error,
cannot initialize BCR
Retry operation; after
several occurrences
contact technical support
Media changer probably defective.
Flexi cable to BCR not properly
connected.
Flexi cable to BCR damaged.
Barcode engine defect.
81
Barcode Reader Error,
no response from BCR
Retry operation; after
several occurrences
contact technical support
Media changer probably defective.
Flexi cable to BCR not properly
connected.
Flexi cable to BCR damaged.
Barcode engine defect.
82
EEPROM Error, no
response from EEPROM
(located on media
changer controller)
Retry operation; after
several occurrences
contact technical support
Media changer probably defective.
Media changer controller not working
(hardware problem, EEPROM defect).
83
Media changer
controller generic
problem
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Media changer hardware not working
(cables, distribution boards, media
changer controller).
84
Setting of gripper
motor parameters
failed
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Elevator distribution board defect.
Cabling incorrect.
85
Setting of slider motor
parameters failed
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Elevator distribution board defect.
Cabling incorrect.
86
Setting of elevator
motor parameters
failed
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Elevator distribution board defect.
Cabling incorrect.
87
Setting of rotation
motor parameters
failed
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Media changer controller defect.
88
Setting of sled motor
parameters failed
Reset the unit and retry
operation. After several
occurrences contact
technical support
Media changer probably defective.
Media changer controller defect.
© Copyright QUALSTAR 2015 74

Qualstar Q24 Specifications

General

Brand	Qualstar
Model	Q24
Category	Storage
Language	English