QUANTA QSSC-980 - DPNM Policy Management

錯誤 ! 尚未定義樣式。 — Using Power Consumption Management
117
Item Description
Enable or Disable DPNM policy control mechanism.
If the state of the selected policy is disabled, all de
fined power budget
management policies are not implemented.
To record the current power consumption value of selected target host to
the graph.
Open the current power control policy configuration on the above pol
icy
configuration list table.
Note: Policy Configuration is only accessible when the DC-
state is ON.
After DC-state is activated, a waiting period is required to receive informa-
tion from the remote ME.
Select to acquire remote BMC hosts and view if the they support DPNM.
Select to create a new policy–predefined values are available.
Modify the current selected policy configuration.
Delete the selected policy configuration.
Enable or disable the state of selected policy. If the state of the se
lected
policy is disabled, the configuration of the policy is not implemented.
Reload configuration policy from a remote ME.
2. Select from the menu items as listed in the previous table.
Enabling DPNM
A list of available server systems (Host Name) are listed, seen the following image. From the Group drop-down
menu, select the type of group to view.
1. Select an available system and tick the correlating radio-button.