錯誤
!
尚未定義樣式。
— Using Power Consumption Management
118
2. Click Enable DPNM from the menu.
Note:
When enabling DPNM, ensure the Power State on the selected server system is
checked (power on).
Disabling DPNM
1. From the Host List frame, select a system with DPNM enabled, and tick the correlating radio-button.
2. Click Disable DPNM to disable the server system.
Adding Trending
1. From the Group Pane, select an available system from the Host List frame.
2. Click Add Trending to complete the process.
Configuring DPNM
1. From the Host List frame, select an available system from the Host List frame.
2. Click Configuration to complete the process.
Refreshing DPNM
The Refresh function pools the available server systems under the Power Control Management function and dis-
plays them in the Host List frame.
Click Refresh to reload the Host list.
To Next Page
Loading...
