BMC CONFIGURATION GROUP
3-41
Alert Policy Tab
This page is used to configure the Alert Policy and LAN destination. You can add, delete or
modify an entry in this page.
Figure 3-27. PEF Management – Alert Policy
The fields of the PEF Management – Alert Policy Tab are explained below.
Table 17: PEF Management - Alert Policy
ITEM DESCRIPTION
Policy Entry #
Displays Policy entry number for the newly configured entry (read-
only).
Policy Number Displays the Policy number of the configuration.
Policy Configuration To enable or disable the policy settings.
Policy Set
To choose any one of the Policy set values from the list.
0: Always send alert to this destination.
1: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set.
2: If alert to previous destination was successful, do not send alert to
this destination. Do not process any more entries in this policy set.
3: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different channel.
4: If alert to previous destination was successful, do not send alert to
this destination. Proceed to next entry in this policy set that is to a
different destination type.
Channel Number To choose a particular channel from the available channel list.
To Next Page
Loading...
Need help?
General
