QUANTA QuantaGrid Series User Manual

BMC CONFIGURATION GROUP
3-42
Procedure:
1. In the Alert Policy Tab, select the slot for which you have to configure the Alert pol-
icy. That is, In the Event Filter Entry Page, if you have chosen Alert Policy number
as 4, you have to configure the 4th slot (the slot with Policy Number 4) in the Alert
Policy Tab.
2. Double click the slot and click Modify to open the Add Alert Policy Entry Page as
shown in the screenshot below.
Figure 3-28. Add Alert Policy Entry Page
3. Policy Entry # is a read only field.
4. Select the Policy Number from the list.
5. In the Policy Configuration field, check Enable if you wish to enable the policy set-
tings.
6. In the Policy Set field, choose any of the Policy set from the list.
7. In the Channel Number field, choose particular channel from the available channel
list.
8. In the Destination Selector field, choose particular destination from the config-
ured destination list.
9. In the Alert String field, enable the check box if the Alert policy entry is Event Spe-
cific.
Destination Selector
To choose a particular destination from the configured destination list.
Note:
LAN Destination has to be configured - under Configuration -> PEF ->
LAN Destination.
Modify To modify the existing entries.
Delete To delete Alert Policy list.
Note:
LAN Destination has to be configured under Configuration -> PEF -> LAN Destination. That
is if you select the number 4 for destination selector in Alert Policy Entry page, then you have
to configure the 4th slot (LAN Destination Number 4) in the LAN Destination tab.
Table 17: PEF Management - Alert Policy (Continued)
ITEM DESCRIPTION

QUANTA QuantaGrid Series Specifications

General

Brand	QUANTA
Model	QuantaGrid Series
Category	Server
Language	English