Quantum DXi6900

Chapter 4: Configuration Wizards
Email Alerts Wizard
Quantum DXi6900 User’s Guide 111
RecipientInformation Description
Name The name of the recipient.
EmailAddress The e-mail address of the recipient.
NotificationType Select the types of notifications to send to the recipient:
l High - Send e-mail notifications for High service tickets.
High service tickets indicate that a critical problem has occurred and
needs to be resolved immediately. The operation and performance of the
DXi6900 are degraded, and there is a risk of system failure or data loss.
l HighandMedium - Send e-mail notifications for High and Medium
service tickets.
Medium service tickets indicate that a serious problem occurred and
needs to be resolved, but it does not necessarily need to be fixed
immediately. The operation and performance of the DXi6900 may be
degraded.
l All - Send e-mail notifications for High, Middle, and Low service tickets,
as well as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the DXi6900 are not
significantly affected.
3. Select the NotificationEnabled check box to enable sending of notifications to the recipient.
4. Click Add.
The recipient displays in the EmailRecipient list.
5. (Optional) To add additional recipients, click Add and then repeat Steps 1–4.
To change a recipient, select it in the EmailRecipient list and click Edit. To remove a recipient, select it
in the EmailRecipient list and click Delete.
6. Click Next to continue.