Quantum DXi6900

Chapter 6: Replication
Receive VTL
Quantum DXi6900 User’s Guide 156
Tasks
Use the ReceiveVTL page to perform the following tasks:
l View received snapshots and recover, failback, or delete snapshots (see Received Snapshots
below).
l Manage recovery jobs (see Recovery Jobs on page 160).
l Manage failback jobs (see Failback Jobs on page 161).
l Manage shares configured for Cartridge Based Replication (see Cartridge Based on page 162).
Received Snapshots
The ReceivedSnapshots page allows you to view and work with received snapshots. When a replicated
VTL partition is received from a source system, it is saved as a snapshot. The snapshot contains all of the
data necessary to fully recover or failback the partition to the point in time when the snapshot was saved.
To access the ReceivedSnapshots page, on the ReceiveVTL page, click the ReceivedSnapshots tab
(see Figure 96 below).
Figure96:Received Snapshots Page
Tasks
Use the ReceivedSnapshots page to perform the following tasks:
l View information about received snapshots (see Snapshots List on the next page).
l Recover a partition on the target system (see Recovering a Partition on the next page).
l Failback a partition to the source system (see Performing a Failback For a Partition on page 158).
l Delete a received snapshot (see Deleting a Snapshot on page 160).