Quantum DXi6900

Chapter 9: Configuration
OST Configuration
Quantum DXi6900 User’s Guide 263
must match the local user credentials on the target (remote) DXi.
To add a remote user:
1. Click Add.
The AddRemoteAIRCredentialwindow displays (see below).
Add Remote AIR Credential
2. Enter information about the remote user:
Username Enter the name of the remote user.
Note:An AIR user name can contain the following characters: 'a-z',
'A-Z', '0-9', '_', and '.'
NewPassword Enter the password for the remote user.
ConfirmNewPassword Enter the password again to confirm it.
Description (Optional) Enter a brief description of the remote user.
3. Click Apply.
Editing a Remote User
Edit a remote user to change the user's password or description.
To edit a remote user:
1. Select the user and click Edit.
The EditRemoteCredentials window displays (see below).
Edit Remote Credentials