Quantum DXi6900

Chapter 9: Configuration
Notifications
Quantum DXi6900 User’s Guide 291
NotificationType Select the types of notifications to send to the recipient:
NotificationType
l High - Send e-mail notifications for High service tickets.
High service tickets indicate that a critical problem has occurred and needs to
be resolved immediately. The operation and performance of the DXi6900 are
degraded, and there is a risk of system failure or data loss.
l HighandMedium - Send e-mail notifications for High and Medium service
tickets
.Medium service tickets indicate that a serious problem occurred and needs to
be resolved, but it does not necessarily need to be fixed immediately. The
operation and performance of the DXi6900 may be degraded.
l All - Send e-mail notifications for High, Middle, and Low service tickets, as
well as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs to be
resolved, but the operation and performance of the DXi6900 are not
significantly affected.
3. Select the Enablenotification check box to enable sending of notifications to the recipient.
Or clear the Enablenotification check box to disable sending of notifications to the recipient.
4. Click Apply.
DeletinganE-mailRecipient
Delete an e-mail recipient if you no longer want the DXi6900 to send e-mail notifications to the recipient.
To delete an e-mail recipient, select the recipient and click Delete.
Note:You can select multiple recipients to delete at once.
Server
The Server page allows you to specify the server for outgoing e-mail. The DXi6900 cannot send e-mail
notifications until you specify the outgoing e-mail server.
To access the Server page, on the Email page, click the Server tab (see Figure 179 on the next page).