Quantum DXi6900

Chapter 4: Configuration Wizards
VTL Wizard
Quantum DXi6900 User’s Guide 88
Figure49:VTL Wizard: Add Media
Step 4: Discover Remote Hosts
1. Click DiscoverRemoteHosts to list all hosts that are known to the DXi6900 (see Figure 50 on the
next page).
A host is made known to the DXi6900 if you enter the host ID on this page, or if the host logs on to one
or more Fibre Channel target ports.
If you do not see the world wide name (WWN) of the host, make sure the host is connected to a Fibre
Channel port on the DXi6900 and click DiscoverRemoteHosts again.
The BackpanelLocations section displays a graphical representation of the Fibre Channel and
Ethernet ports as they appear on the rear of the system.
Note:An Active status indicates the host is currently logged on to one or more Fibre Channel
target ports.
2. Enter information about the host:
HostInformation Description
RemoteHostWWPN Enter the World Wide Port Name (WWPN) of the host.
Alias Enter a descriptive alias for the host
3. Click Apply.