Quantum Scalar i6 User Manual

Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later 35
Scalar Key Manager 2.5
13 When prompted, enter and re-enter a password that will be used during the pk12
file generation.
A message informs you when certificate generation is complete. The location of the
certificates (
/home/akmadmin/generatedcerts) is also provided.
14 Complete the process by loading the certificates onto the SKM servers and tape
libraries using the procedures described in the user’s guide for the applicable
libraries.
• For the Scalar i40/i80, refer to “Importing Encryption Certificates” in the Scalar
i40 and Scalar i80 User’s Guide
.
• For the Scalar i2000/i6000, refer to “Step 3 — Installing TLS Communication
Certificates on the Library” in the
Quantum Scalar i2000/i6000 User’s Guide .
• For the Scalar i3, refer to the topic “Load Certificate - Encryption” in the Scalar i3
Documentation Center: http://qsupport.quantum.com/kb/flare/content/
Scalar_i3/docCenter/Encryption_Load_Certificate.htm
• For the Scalar i6, refer to the topic in the Scalar i3 Documentation Center: http:/
/qsupport.quantum.com/kb/flare/content/Scalar_i6/docCenter/
Encryption_Load_Certificate.htm

Quantum Scalar i6 Specifications

General

Category	Tape Library
Number of Drives	6
Management	SNMP
Tape Technology	LTO Ultrium
Drive Types Supported	LTO-9, LTO-8, LTO-7, LTO-6
Type	Tape Library
Capacity	Up to 75 TB (native)
Power Supply	Redundant power supplies standard
Humidity	20% to 80% non-condensing
Interface	SAS