Quectel RM502Q-GL - Page 16

5G Module Series
RM502Q-GL Hardware Design
RM502Q-GL_Hardware_Design 15 / 83
synchronization
Transmitting Power
⚫ WCDMA bands: Class 3 (24 dBm +1/-3 dB)
⚫ LTE-FDD bands: Class 3 (23 dBm ±2 dB)
⚫ LTE-TDD bands: Class 3 (23 dBm ±2 dB)
⚫ LTE B38/B40/B41/B42/B43 bands HPUE
1)
: Class 2 (26 dBm ±2 dB)
⚫ 5G NR bands: Class 3 (23 dBm +2/-3 dB)
⚫ 5G NR n41/n77/n78 bands HPUE: Class 2 (26 dBm +2/-3 dB)
5G NR Features
⚫ Supports 3GPP Rel-15
⚫ Supported Modulations:
- Uplink: π/2-BPSK, QPSK, 16QAM, 64QAM and 256QAM
- Downlink: QPSK, 16QAM, 64QAM and 256QAM
⚫ Supported MIMO
- Uplink : 2 × 2 MIMO
2)
on n41/n77/n78
- Downlink: 4 × 4 MIMO on n1/n2/n3/n7/n25/n38/n40/n41/n48/n66/n77/
n78
⚫ Supports SCS 15 kHz and 30 kHz
3)
⚫ Supports NSA and SA operation modes
4)
⚫ Supports Option 3x, 3a, 3 and Option 2
⚫ Max. transmission data rates
5)
:
- NSA: 5.0 Gbps (DL)/ 650 Mbps (UL)
- SA: 4.2 Gbps (DL)/ 900 Mbps (UL)
LTE Features
⚫ Supports 3GPP Rel-15
⚫ LTE Category: DL Cat 20; UL Cat 18
⚫ Supported Modulations:
- Uplink: QPSK, 16QAM, 64QAM and 256QAM
- Downlink: QPSK, 16QAM, 64QAM and 256QAM
⚫ Supports 1.4 MHz to 20 MHz RF bandwidth
⚫ Supports DL 4 x 4 MIMO on:
B1/B2/B3/B4/B7/B25/B30/B34/B38/B39/B40/B41/B42/B43/B48/B66
⚫ Max. transmission data rates
5)
: 2.0 Gbps (DL)/ 200 Mbps (UL)
UMTS Features
⚫ Supports 3GPP Rel-9 DC-HSDPA, HSPA+, HSDPA, HSUPA and WCDMA
⚫ Supports QPSK, 16QAM and 64QAM modulations
⚫ Max. transmission data rates
5)
:
- DC-HSDPA: 42 Mbps (DL)
- HSUPA: 5.76 Mbps (UL)
- WCDMA: 384 kbps (DL/UL)
Rx-diversity
⚫ 5G NR/LTE/WCDMA Rx-diversity
GNSS Features
⚫ Protocol: NMEA 0183
⚫ Data Update Rate: 1 Hz
Antenna Interfaces
⚫ ANT0, ANT1, ANT2_GNSSL1, and ANT3
AT Commands
⚫ Compliant with 3GPP TS 27.007 and 3GPP TS 27.005