Quectel UC200T-GL - 7 Dimensions and Packaging; General Description; Mechanical Dimensions of UC200 T-GL Mini Pcie; Standard Dimensions of Mini PCI Express

UMTS/HSPA+ Standard Module Series
UC200T-GL Mini PCIe Hardware Design
UC200T-GL_Mini_PCIe_Hardware_Design 41 / 51
6 Dimensions and Packaging
6.1. General Description
This chapter mainly describes mechanical dimensions as well as packaging specification of UC200T-GL
Mini PCIe module. All dimensions are measured in millimeter (mm), and the dimensional tolerances are
±0.05mm unless otherwise specified.
6.2. Mechanical Dimensions of UC200T-GL Mini PCIe
4.00±0.10
48.05±0.20
8.45±0.20
2xΦ2.60±0.1
3x3.00±0.10
5.98±0.10
5.83±0.20
6.00±0.20
8.25±0.10
24.20±0.20
30.00±0.15
Pin1
Pin51
1.00±0.10
9.93±0.20
34.15±0.10
1.40±0.10
50.95±0.15
Top View
Side View
10.5±0.20
32.0±0.15
2.9±0.20
4.9±0.20
0.5±0.10
5.1±0.15
0.61±0.05
0.5
Figure 18: Mechanical Dimensions of UC200T-GL Mini PCIe
6.3. Standard Dimensions of Mini PCI Express
The following figure shows the standard dimensions of Mini PCI Express. Please refer to document [1]
for Detail A and Detail B.