14
If the solutions above do not address the issue you are experiencing, reset the X5 to its factory settings. Turn the detector off and
then hold the POWER touchpad for 5 seconds. All of the icons on the screen will illuminate indicating the detector has been reset.
Warranty & Service Information
Quest Metal Detectors provides a two-year warranty on all of our detectors. To register your Quest X5, please go to our website at
www.QuestMetalDetectors.com and click on SUPPORT. Scroll down to REGISTRATION and fill out the form to activate your two year
warranty. If you have difficulty registering your detector online, please contact the dealer you purchased it from to finish the process.
For your records, fill out the form below to help expedite any warranty work that you might require.