15 000690871.NA Rev. A Q50 R Carbon
4.4 Folding
When the wheelchair needs to be folded, please pull up the latch
at the rear of the backrest while pushing the backrest forward (Fig.
4.12). Then with one hand on the seat cushion and one on the
backrest, fold the wheelchair. With the wheelchair body folded in
place, • ip up the footrest, the wheelchair can be placed standing up.
(Fig. 4.13 - 4.16)
To keep the frame compact when li• ing the wheelchair, apply the
hook and loop strap and pull it • ght so that the wheelchair doesn’t
collapse. (Fig. 4.15)
4.5 Control system program
This wheelchair is equipped with a control system that can be
programmed by adjus• ng se! ngs within the system. This is a
specialized job that needs training and can only be adjusted with
professional so• ware. The end user is not allowed to adjust these
se! ngs.
DANGER!
The incorrect se! ng of the parameters for the control system may
result in injury. Se! ngs must be made by quali" ed specialists.
Fig. 4.13
Fig. 4.15
Fig. 4.14
Fig. 4.16
Fig. 4.12
To Next Page
Loading...
Need help?
General
