36 000690871.NA Rev. AQ50 R Carbon
10.0 Trouble shoo• ng
If the wheelchair is not working as it should, check the following points.
• Check whether the ba• eries are charged.
• Turn the wheelchair o• and then back on again.
• Check whether the ba• ery plugs are all securely in place.
• Check whether the freewheel lever is in the DRIVE posi• on
• Make sure that the controller isn’t locked
11.0 Technical specifi ca• ons: Applicable norms / standards
This product complies with the regula• ons and guidelines for medical aids and carries a CE and UKCA symbol.
The product meets the requirements and standards below. These are checked by independent ins• tu• ons.
EN ISO 10993-5:2009
Biological evalua• on of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009)
As the Authorized Representa• ve, SUNGO CERTIFICATION COMPANY LIMITED, declares that the product conforms to the
UK Medical Devices Regula• on 2002 No. 618.
Standard Defi ni• on / descrip• on Test Dummy Weight
Medical Device Regula• on
(EU) 2017/745
Applicable as men• oned in Appendix 1
EN 12182: 2012
Class A
Assis• ve products for persons with disability - General requirements
and test methods
136 kg (300 lbs)
Q50 R Carbon 136 kg (300 lbs)
EN 12184: 2022
Class A
Electrically powered wheelchairs, scooters and their chargers -
Requirements and test methods
136 kg (300 lbs)
Q50 R Carbon 136 kg (300 lbs)
ISO 7176-8: 2014
Requirements and test methods for impact, sta• c and fa• gue
strengths
N/A
ISO 7176-9: 2009 Climate tests for electric wheelchairs N/A
ISO 7176-14: 2022
Requirements and test methods for control systems for electric
wheelchairs
N/A
ISO 7176-16: 2012 Requirements for resistance to igni• on of upholstered parts N/A