76©2006 Sunrise Medical
SEATING SECTION
Note: Each starting back height adjusts upward 3”. The
adjustment is based on a slot & block alignment. Refer
to the following illustrations for adjustment procedures
and ranges.
Remove back cushion.•
Locate the mounting hardware securing the back •
assembly to the Perfect Fit Seating System.
Remove the back assemblies from the frame.•
Locate the four adjustment blocks. Refer to the •
following diagrams.
Reposition the back assembly by moving the •
hardware on the block.
Reinstall the back assembly. •
Seat Back Height Adjustments
Note: Many third-party backs will mount to the
Perfect Fit Seating System. Refer to their installation
instructions before mounting their equipment to the
Perfect Fit Seating System.
Fig 3.18
Fig 3.19
Fig 3.20
To Next Page
Loading...
Need help?
General
