Outdoor/altitude operation
The compressor is not designed for outdoor installation.
The compressors can be sold with option rain protection. With this option, this compressor
can be installed outside under a shelter, in frost free conditions. If frost might occur, the
appropriate measures must be taken to avoid damage to the machine and its ancillary
equipment. Consult your supplier.
Moving/lifting
The compressor can be moved by a lift truck using the slots in the frame. Take care not to
damage the bodywork during lifting or transport. Make sure that the forks protrude from the
other side of the frame. The compressor can also be lifted after inserting beams in the
slots. Make sure that the beams cannot slide and that they protrude from the frame equally.
The chains must be held parallel to the bodywork by chain spreaders in order not to
damage the compressor. The lifting equipment must be placed in such a way that the
compressor is lifted perpendicularly. Lift gently and avoid twisting.
Instruction book
66 2920 7190 02
To Next Page
Loading...
