GRB-200 Demodulator (GOES-R) OI&M
GRB-200 Demodulator (GOES-R) OI&M
© Copyright 2015, Quorum Communications, Inc.
General Information 2.3.7
Proper data interface operation requires matching the signal types and
polarities of the GRB-200 to the input requirements of the interface. Refer to
SECTION 3 for this information.
After the GRB-200 has been installed and the cables have been connected,
route the cables in a manner appropriate for safety, convenience, and to prevent
them from becoming damaged. If the GRB-200 is mounted in a rack, using
plastic ties to fasten the cables to the rails is recommended.
To Next Page
Loading...