GRB-200 Demodulator (GOES-R) OI&M
GRB-200 Demodulator (GOES-R) OI&M
© Copyright 2015, Quorum Communications, Inc.
General GRB Feed Status
Figure 27 - General GRB Feed Status Screenshot
Feed Sn GRBTST: the GRB Feed serial number. This will normally be a
number like 150601
R1.00: the GRB Feed Controller firmware revision
Volts 23.0: the voltage that the Feed is receiving from the demodulator
LO LK: The status of the GRB Feed LO (Local Oscillator)
This display is useful to determine that the voltage drop to the feed from the
demodulator is within specification and that the local oscillator is operating.
To Next Page
Loading...