GRB-200 Demodulator (GOES-R) OI&M
GRB-200 Demodulator (GOES-R) OI&M
© Copyright 2015, Quorum Communications, Inc.
When replacing the fuses, always switch the power to OFF and remove
the AC line cord to prevent electrical shock.
SECTION 5 MAINTENANCE
5.1 FUSE REPLACEMENT
Two (2) line input fuses are contained in the integrated power input module on the
rear of the rack mount unit (see Figure 37). The GRB-200 primary power input
requires two 5x20mm fast-acting fuses, two (2) amps.
Figure 37 - Fuse Holder
To Next Page
Loading...