© Copyright Qvis ®. All documentation rights reserved. 19
Network →PPPoE
Tick ‘Enable PPPoE’, this enables the PPPoE function. Input the
PPPoE user name and PPPoE password, click ‘Save’ and restart
camera. Camera will now gain a public IP address.
After modifying the related parameters, need to click ‘Save’ to save
settings. See picture 2.2.6-9
Picture 2.2.5-9 PPPoE configuration
Note： When PPPoE configuration is enabled the default gateway
becomes invalid；when the parameters in network settings are modified,
you will need to reboot device.
Network → FTP
By setting up the FTP parameter, the user will then be able to upload
snapshot files to an FTP server. See picture 2.2.5-10
‘Server address’ and ‘Port’ number need to correspond to the ones on
FTP server. ‘Directory structure’ is where you can set the save path of
file. Options include; ‘Save in the root directory’, ‘Save in the parent
directory’, ‘Save in the child directory’. When choosing parent director
you can include ‘Use device name’, ‘Use device number’ ‘Use device IP
address’. Child directory includes ‘Use camera name’, ‘Use camera
number’.
After modifying related parameters, need to click ‘Save’ to save
settings.
To Next Page
Loading...
Need help?
General
